Structure and Working Principle of Screw Drilling Tools


  Universal Joint Assembly

  It is located at the lower end of the rotor and serves to transmit the torque and rotational speed generated by the motor to the transmission shaft. To perform this function effectively, the component must possess excellent flexibility, enabling it to convert the rotor's eccentric motion into the transmission shaft's uniform rotational movement around a fixed axis. Therefore, universal joints typically employ either a universal joint yoke design or a flexible shaft configuration.

  From the perspective of the overall lifespan of the screw drill tool, the universal joint assembly typically has the shortest lifespan. Therefore, after using the screw drill, it’s important to promptly disassemble, repair, and inspect this component.

  Drive Shaft Assembly

  Its function is to transmit the rotational power from the motor to the drill bit, while simultaneously bearing the axial and radial loads generated by the drilling pressure.

  Classified by lubrication method, there are two types: the mud-lubricated propeller shaft assembly and the oil-sealed propeller shaft assembly.

  a. Mud-lubricated Transmission Shaft Assembly:

  This assembly uses drilling mud as the lubricant, providing both lubrication and cooling for the string bearings and radial bearings within the drive shaft assembly. Thanks to its relatively simple design, it features the shortest distance from the bend point to the drill bit. Additionally, the upper radial bearing in this configuration—also known as a flow limiter—helps regulate the flow of mud passing through the bearing assembly.

  b. Oil-sealed drive shaft assembly:

  This assembly uses a sealing component to enclose the thrust bearings and part of the radial bearings, while simultaneously injecting high-temperature lubricant for smooth operation. By reducing bearing wear, the service life of the bearings is significantly extended.

  Classified by the water nozzle pressure drop experienced by the drill bit, they are divided into three types: 3.5C, 7Y, and 14J.

  a. The water-side pressure drop is 3.5 MPa. The upper and lower bearings in this structure are thrust ball bearings, while the radial bearings come in two options: either two sets of cemented carbide bearings or two sets of rubber bearings.

  b. The water-side pressure drop is 7 MPa. This structure features either multiple sets of angular contact thrust ball bearings or multi-row thrust ball bearings for the upper and lower bearings, while the radial bearings consist of several sets of cemented carbide bearings installed at both the top and bottom.

  c. The water-side pressure drop is 14 MPa. This structure features multiple sets of planar thrust friction bearings with embedded PDC composite plates in both the upper and lower bearings, while the radial bearings consist of a pair of CC alloy bearings—one at the top and one at the bottom.

  The bearings in the drive shaft assembly are classified according to the type of load they bear, and are divided into thrust bearings and radial bearings.

  a. Shaft bearing

  The bearing assembly consists of multi-row radial thrust ball bearings, which primarily bear the downward force exerted by the entire fluid column and the combined weight of the rotor, universal joint shaft, transmission shaft, and drill bit when the drill bit is idling above the well bottom. When the drill bit makes contact with the well bottom during operation, the bearing assembly supports the applied drilling pressure.

  b. Radial Bearing

  Radial bearings are plain bearings, with one set located at the top and another at the bottom. They primarily serve to support bending loads caused by the rotor’s planetary motion, as well as lateral forces acting on the drill bit. In mud-lubricated drive shaft assemblies, the upper radial bearing is also referred to as a flow limiter. This component allows a portion of the mud flowing from the motor—approximately 5–10%, under maximum nozzle pressure drop—to pass through the bearing assembly, effectively cooling and lubricating the bearing in the process.

  Additionally, the screw drill tool drive shaft assembly also includes various conventional stabilizers and interchangeable stabilizers. The stabilizer vanes come in a wide range of designs, effectively enhancing stability.

  Working conditions and parameters of screw drill tools

  The performance and lifespan of screw drill tools are closely tied to their selection, the on-site drilling conditions, and how they are operated by the personnel. Therefore, before using a screw drill tool, wellsite technicians and the driller should first familiarize themselves with its structural principles and operational parameters, and then follow the guidelines in the user manual to ensure proper and efficient use.

  Drilling Operation Plan

  Based on the overall wellbore drilling operation plan, develop a detailed and specific drilling schedule tailored to the requirements of the screw drill string. Specifically, the drilling engineer will determine the appropriate drill bit and screw model by aligning the task with the formation structure, wellbore diameter, depth, and mechanical drilling rate, while also designing an optimal drill string assembly.

  Drilling mud

  The screw drill is a positive-displacement motor, and its performance is determined by the motor’s input flow rate and the pressure drop acting across its two ends—rather than by the type of drilling fluid used. As a result, it can typically operate effectively with a wide variety of mud types. While mud density and viscosity have minimal impact on drill performance, they directly influence overall system pressure. It is recommended that the maximum plastic viscosity of the mud should not exceed 0.05 Pa·s (50 cP). Additionally, any hard particles present in the mud must be carefully controlled; specifically, the sand content in the drilling fluid should ideally remain below 1%. If the sand content exceeds 5%, the lifespan of the drill tool will be significantly reduced.

  When using oil-based or diesel-based muds, it’s important to control the aromatic hydrocarbon content—particularly considering their tendency to cause swelling and cavitation in the stator rubber—while simultaneously raising the aniline point of the oil-based mud. The aniline point refers to the temperature at which a uniformly mixed oil-and-aniline solution in the mud separates into two distinct phases upon cooling. Typically, the aniline point for standard oil-based muds should exceed 70°C; however, when operating at higher bottomhole temperatures, the aniline point should be elevated to 93°C or even higher.

  When chloride levels in the mud are high, motor life can be shortened due to corrosion—this effect becomes even more pronounced at elevated downhole temperatures. If a screw motor has already been used in mud with high chloride content, it should be thoroughly flushed at the wellhead immediately after retrieval to prevent corrosion of the motor components.

Chengdu Tdrill Energy Technology Co., Ltd.

Related News


A New Journey, Achieving Success Today|The annual gala of Chengdu Tdrill Energy Technology Co.,Ltd. concludes successfully, setting sail on a new chapter with renewed vigor.

The annual meeting of Chengdu Tdrill Energy Technology Co.,Ltd., themed "Leap into a New Journey, Achieve Success Today," has concluded successfully. All colleagues and guests gathered together to review past achievements, outline plans for the new year, recognize outstanding individuals, unite our strengths, and jointly embark on a new journey of high-quality development for the company.


2026 Spring Festival Holiday Notice

Our company is pleased to announce the 2026 Spring Festival holiday schedule: The holiday period will run from February 11, 2026 (the 22nd day of the 12th lunar month) to February 23, 2026 (the 7th day of the 1st lunar month). Normal office operations will resume on February 24, 2026 (the 8th day of the 1st lunar month). During the holiday period, routine business processing will be temporarily suspended. We will promptly respond to any inquiries or collaboration requests once we resume work. On this joyous occasion of the Spring Festival, our company extends festive greetings to all our valued customers. We deeply appreciate your long-term support and trust, and wish you a happy Spring Festival and smooth sailing in all your endeavors.


PDC Drill Bits Crossing Intersecting Formations: How to Avoid Damage Caused by “Instantaneous Overload”

In oil drilling operations, the transition zone where the drill bit moves from soft rock formations into hard rock formations (or vice versa) is often a high-risk area for drill bit damage. A recent study, using sophisticated digital simulations, has revealed the underlying mechanical mechanisms behind this phenomenon and proposed effective solutions.

Product Inquiry

Please fill in the question you’d like to consult about, and we’ll provide you with the appropriate product support based on your needs!