PDC Drill Bits Crossing Intersecting Formations: How to Avoid Damage Caused by “Instantaneous Overload”
Release date:
2026-01-04
Source:
Https://mp.weixin.qq.com/s/ZlA9x584MtfXVzkxXJV50A?color_scheme=light
In oil drilling operations, the transition zone where the drill bit moves from soft rock formations into hard rock formations (or vice versa) is often a high-risk area for drill bit damage. A recent study, using sophisticated digital simulations, has revealed the underlying mechanical mechanisms behind this phenomenon and proposed effective solutions.
Problem Background: Why is the interaction layer the drill bit? “ Nightmare ”?
When PDC When drilling through alternating soft and hard formations, the cutting teeth on different parts of the drill bit will simultaneously be in rock layers of varying hardness. This uneven distribution of load can cause some local cutting teeth to experience momentary overload, leading to their failure.

Tangential overload on the cutting teeth at the nose of the drill bit when it enters hard formations.
On-site observations show that when transitioning from soft formations into hard formations, the drill bit... Nasal cutting teeth easily damaged; and when transitioning from a hard formation into a soft formation, Conical and shoulder cutting teeth More susceptible to damage. This phenomenon is directly related to transient load peaks.
Research Method: Creating a Digital Drilling Simulation Environment
The research team has developed a physics-based drilling simulation environment capable of simulating... PDC The drilling process of a drill bit in an interactive formation. This model takes into account the detailed design of the drill bit (including its cutting structure and features of the cutting depth limiter) as well as the axial and torsional flexibility of the drill string.
For modeling 17.5 inch PDC Drill bit CAD Image
The simulation used one. 7 Knife wing's 17.5 inch PDC Drill bit, set for soft salt rock ( UCS = 2 kpsi ) and hard limestone ( UCS = 23 kpsi ) Two geological formations were used to simulate five different drilling control scenarios.
Core finding: Constant ROP Significantly reduces transient loads.
Case 1 Constant drilling pressure ( WOB ) Control
When constant drilling force control is employed, the load on the cutting teeth at the nose of the drill bit will increase instantaneously as the bit enters a hard formation. 3-4 Multiple; when exiting the hard formation, the cutting teeth on the cone and shoulder sections will similarly experience similar overload.
The maximum transient load on each cutting tooth under constant drilling pressure
Case 2 Constant mechanical drilling rate ( ROP ) Control
When constant mechanical drilling rate control is employed, after the drill bit enters a new formation, the load will smoothly transition to a new steady-state distribution. Almost no overshoot. Phenomenon. This significantly reduces the risk of overload on the cutting teeth.
The maximum transient load on each cutting tooth under constant mechanical drilling rate
Realistic Challenge: The Impact of Drillstring Flexibility
In actual drilling operations, the flexibility of the drill string can complicate matters. Even if the surface control maintains a constant mechanical drilling rate, the compression and elongation of the drill string can cause fluctuations in the actual mechanical drilling rate at the bottom of the well.

Transient Loads Under Constant Surface Mechanical Drilling Rate Considering Drillstring Flexibility
Especially when transitioning from hard formations to soft formations, the elastic recovery of the drill string can cause an instantaneous spike in mechanical drilling rate, thereby exposing the cutting teeth on the cone and shoulder to the risk of overload.
Solution: Cutting depth ( DOC ) The function of the limit switch
To address this issue, the research team tested the effectiveness of incorporating cutting-depth limiters into the drill bit design. These limiters begin to contact the bottom of the well when the cutting depth exceeds a preset value, absorbing part of the drilling force and thereby preventing excessive overshoot in the mechanical drilling rate.
DOC The contact area of the limit switch varies with the feed rate per revolution of the drill bit.
The simulation results show that, upon incorporation... DOC After the limit switch, the mechanical drilling rate overshoot when exiting the hard formation is... 353 ft/hr Drop to 167 ft/hr The peak load on the cutting teeth at the cone and shoulder sections has been reduced by nearly... 40%。
Join DOC After the limiter is installed, the transient load is significantly reduced.
Practical Application: Developing an Intelligent Drilling Roadmap
Based on these findings, the research team recommends adopting... Feet per revolution ( PPR ) Control rather than relying solely on bit weight or mechanical drilling rate control, and combined with a carefully designed... DOC Limit switch feature.
Example of a drilling route map showing the catastrophic loss of drilling rate under rotary torque control mode.
By creating a detailed drilling roadmap that clearly defines the control strategies and parameter ranges to be used in different geological formations, drilling efficiency can be significantly improved and drill bit damage can be reduced.
Future Outlook: From Experience to Precision Engineering
Next, the research team plans to develop cutting teeth. Dynamic Stress Model This directly links load forecasting with the structural integrity of cutting teeth. As a result, drill bit design and parameter recommendations will be based on a more robust engineering foundation.
This study, through sophisticated numerical simulations, clearly demonstrates that... PDC The transient load mechanism of drill bits during drilling in interactive formations, and demonstrate:
- Constant feed per revolution control It is more effective at reducing cutting tooth overload than constant drilling pressure control.
- DOC Limit switch Can significantly reduce the mechanical drilling rate overshoot when exiting hard formations.
- Smart Drilling Roadmap It is key to achieving efficient and safe drilling.
These findings provide crucial guidance for optimizing drilling practices and reducing non-productive time, and hold promise for significantly saving time and resources in future oil and gas exploration efforts.
Chengdu Tdrill Energy Technology Co., Ltd.
Related News
The annual meeting of Chengdu Tdrill Energy Technology Co.,Ltd., themed "Leap into a New Journey, Achieve Success Today," has concluded successfully. All colleagues and guests gathered together to review past achievements, outline plans for the new year, recognize outstanding individuals, unite our strengths, and jointly embark on a new journey of high-quality development for the company.
2026 Spring Festival Holiday Notice
Our company is pleased to announce the 2026 Spring Festival holiday schedule: The holiday period will run from February 11, 2026 (the 22nd day of the 12th lunar month) to February 23, 2026 (the 7th day of the 1st lunar month). Normal office operations will resume on February 24, 2026 (the 8th day of the 1st lunar month). During the holiday period, routine business processing will be temporarily suspended. We will promptly respond to any inquiries or collaboration requests once we resume work. On this joyous occasion of the Spring Festival, our company extends festive greetings to all our valued customers. We deeply appreciate your long-term support and trust, and wish you a happy Spring Festival and smooth sailing in all your endeavors.
In oil drilling operations, the transition zone where the drill bit moves from soft rock formations into hard rock formations (or vice versa) is often a high-risk area for drill bit damage. A recent study, using sophisticated digital simulations, has revealed the underlying mechanical mechanisms behind this phenomenon and proposed effective solutions.