Fundamentals of Rotary Steering Drilling Systems


  

Overview of Rotary Steering Drilling

  The Rotary Steering System (RSS) is a tool that enables real-time control of the downhole drilling direction—essentially equipping the drill bit with "sharp eyes" and a "steering wheel." This innovation allows for efficient, precise, and single-trip drilling straight through the target formation, representing a major breakthrough in horizontal drilling technology since the 1990s.

  To date, directional drilling technology has reached three major milestones:

  1. Use a directional drilling tool (bent sub) for directional drilling;

  2. Utilizing downhole motors combined with bent subs for directional drilling;

  3. Utilize a directional motor (bent-hull downhole motor) for directional drilling.

  The widespread use of these three directional drilling tools has spurred the rapid advancement of directional drilling technology, enabling modern oilfield development through techniques such as deviated wells, cluster wells, horizontal wells, and horizontal multi-lateral wells.

  With the development of the oil industry, achieving better economic returns requires drilling deep wells, ultra-deep wells, large-displacement wells, and long-reach horizontal wells—often in more complex geological formations, such as steeply dipping structural zones. These demands place increasingly stringent requirements on directional drilling tools.

  To address the limitations of sliding directional drilling technology, international research into rotary steerable drilling systems began in the late 1980s. By the early 1990s, several companies had successfully developed commercially viable versions of this technology. Essentially, a rotary steerable drilling system is a downhole closed-loop variable-diameter stabilizer integrated with measurement-while-drilling (MWD) or logging-while-drilling (LWD) instruments. This innovative system completely moves away from the conventional sliding approach, instead employing rotary steering to automatically and flexibly adjust well inclination and azimuth. As a result, it significantly boosts drilling speed and enhances operational safety, while also delivering exceptional trajectory control accuracy. This makes it ideally suited for guiding specialized wells—such as ultra-deep wells targeting unconventional reservoirs, highly challenging directional wells, horizontal wells, extended-reach wells, and complex horizontal branch wells—that demand cutting-edge precision and efficiency in today’s oil and gas exploration and production.

  Internationally used rotary steerable drilling systems

  Schlumberger (PD, XCEED, ARCHER, PV)

  Halliburton (GP)

  Baker Hughes (AUTO-TRAK)

  Weatherford (Revolution)

  Classification of Rotary Steering Methods

  At the core of a rotary steerable drilling system is the downhole rotary steerable drilling tool assembly. According to international standards, current downhole rotary steerable tools can be classified into two main types based on their steering mechanisms: Push the Bit and Point the Bit. The Push the Bit approach directly applies lateral force near the drill bit, while the Point the Bit method uses bending in the drill string close to the bit to steer the bit toward the desired wellbore trajectory direction.

  Classification of Rotary Steering Methods

  At the heart of a rotary steerable drilling system is the downhole rotary steerable drilling tool assembly. According to international standards, current downhole rotary steerable tools can be classified into two main types based on their steering mechanisms: Push the Bit and Point the Bit. The Push the Bit approach directly applies lateral force near the drill bit, while the Point the Bit method relies on the curvature and rotation of the drill string in the vicinity of the bit to achieve directional control during drilling operations.

  The working mechanism of rotary steerable drilling systems relies on bias units that individually offset either the drill bit or the drill string, thereby generating directional control. These bias units can be further categorized into two types: static bias and dynamic bias (also known as modulated bias), as illustrated in Figure 2. In static bias systems, the steering mechanism remains stationary relative to the drill string during drilling, applying lateral force in a fixed direction. On the other hand, modulated bias systems rotate along with the drill string while drilling, using a sophisticated control system to orient the mechanism at specific positions and deliver the necessary steering force—ultimately guiding the drill bit toward the desired wellbore trajectory.

  Down Link Commander Command Transmitter

  The inlet of the command transmitter connects to the riser, while the outlet connects to the mud pit.

  Typically installed on the drill floor, preferably positioned higher than the mud pit.

  When a negative pulse signal is sent as a command, the displacement decreases by approximately 20%, returning to its normal value after a few seconds.

  Connection coupling type for the command transmitter and high-pressure pipeline: 2” FIG1502

  Choosing the right drill bit

  It is recommended to use spiral-shaped gauge-keeping drill bits.

  Cutting teeth are prohibited on the gauge section of the drill bit to avoid compromising tool stability.

  RSS demands high stability from drill bits, and the bit's gauge length—as well as the length of the fully sized gauge section—must align with the wellbore size and the expected rate of penetration (ROP).

  The foot diameter section with ROP less than 36 m/h has a length of 4”–8” (with a standard length of 6”).

  Use RSS-specific drill bit software for simulation and propose the corresponding drill bit requirements.

  Once the drill bit's gauge section wears down by more than 1/32", it can no longer be reused with the RSS.

Rotary Steering System Technical Specifications

Tool dimensions 475 675 825
Drill bit size 6-6 %4 in. 8 1/2 to 9 7/8 inches 12 1/4 & 17 1/2 in.
Create a slope 0-10°/30m 0-10°/30m 0–7.5°/30m
Rotational speed 50–250 rpm 50–250 rpm 50–250 rpm
Maximum displacement 350 gallons per minute 750 gallons per minute 1,500 gallons per minute
Maximum drilling pressure 25,000 lbs 50,000 lbs 90,000 lbs
Maximum hydrostatic pressure 25,000 psi 25,000 psi 25,000 psi
Maximum temperature 165°C 165°C 165°C
Ultimate Tensile Strength 250,000 lbs 350,000 lbs 495,000 lbs
Drill bit pressure drop Unlimited Unlimited Unlimited
Minimum build-up angle Vertical wellbore Vertical wellbore Vertical wellbore
Maximum sand content 2% 2% 2%

  Method for Controlling Drill Bit Trajectory:

  Pointing type, thrust-support type

  The goal of the technology development direction is to combine the advantages of both approaches—creating a hybrid solution.

  Directional: Rocker drill bit to align it parallel to the target wellbore trajectory—Directional RSS

  Push-the-bit type: The drill bit is biased to ensure its axis does not run parallel to the target wellbore trajectory—this is achieved using a motor and a push-the-bit RSS system.

PowerDrive Archer – How It Works

  The Revolution in Efficient Drilling Tools—The Full-Rotation Managed Steer System (MSS)

  The advantages of the motor (simple and reliable; cost-effective; powerful) + the advantages of RSS (rotary steering, excellent efficiency, high safety) = the Full-Rotary Steering System

  Weatherford's Full-Rotation Steering System introduces a groundbreaking directional trajectory-control technology—Targeted Speed Control—designed to overcome the limitations and drawbacks of conventional motor-based sliding-direction control, ultimately optimizing drilling performance.

 

Chengdu Tdrill Energy Technology Co., Ltd.

Related News


A New Journey, Achieving Success Today|The annual gala of Chengdu Tdrill Energy Technology Co.,Ltd. concludes successfully, setting sail on a new chapter with renewed vigor.

The annual meeting of Chengdu Tdrill Energy Technology Co.,Ltd., themed "Leap into a New Journey, Achieve Success Today," has concluded successfully. All colleagues and guests gathered together to review past achievements, outline plans for the new year, recognize outstanding individuals, unite our strengths, and jointly embark on a new journey of high-quality development for the company.


2026 Spring Festival Holiday Notice

Our company is pleased to announce the 2026 Spring Festival holiday schedule: The holiday period will run from February 11, 2026 (the 22nd day of the 12th lunar month) to February 23, 2026 (the 7th day of the 1st lunar month). Normal office operations will resume on February 24, 2026 (the 8th day of the 1st lunar month). During the holiday period, routine business processing will be temporarily suspended. We will promptly respond to any inquiries or collaboration requests once we resume work. On this joyous occasion of the Spring Festival, our company extends festive greetings to all our valued customers. We deeply appreciate your long-term support and trust, and wish you a happy Spring Festival and smooth sailing in all your endeavors.


PDC Drill Bits Crossing Intersecting Formations: How to Avoid Damage Caused by “Instantaneous Overload”

In oil drilling operations, the transition zone where the drill bit moves from soft rock formations into hard rock formations (or vice versa) is often a high-risk area for drill bit damage. A recent study, using sophisticated digital simulations, has revealed the underlying mechanical mechanisms behind this phenomenon and proposed effective solutions.

Product Inquiry

Please fill in the question you’d like to consult about, and we’ll provide you with the appropriate product support based on your needs!