Drilling Speed-Up Tool — Hydraulic Oscillator


The application background of the hydraulic oscillator

The primary method of applying drilling pressure to the bit is by using the weight of the drill string to crush rock. However, this traditional pressurization technique often faces certain limitations in field operations such as large-displacement wells, highly inclined wells, and horizontal wells.

For example:

1. Drilling pressure transmission efficiency is low, severely impacting drilling speed.

2. The drill string experiences sinusoidal or helical bending, even leading to "self-locking."

3. Unstable tool face affects wellbore trajectory control (severe sticking occurs).

Using a hydraulic oscillator effectively addresses the issue of high drill string friction resistance in current drilling operations, which often leads to pressure loss and reduces drilling speed. It works by converting static friction into dynamic friction.

Currently, the hydraulic oscillator (AG-Itator) produced by U.S.-based National Oilwell Varco (NOV) is the most representative model.

Composition of the Hydraulic Oscillator (Screw Type)

The hydraulic oscillator consists primarily of three components:

1) Oscillating short section;

2) Power unit;

3) Valve and bearing systems.

The hydraulic oscillator enhances the efficiency of weight-on-bit transmission during drilling and reduces friction between the bottomhole assembly and the wellbore by generating its own longitudinal vibrations. This means the hydraulic oscillator can improve weight-on-bit delivery in various drilling modes—particularly in directional drilling with power drills—while minimizing the risk of drillstring sticking and reducing torsional vibrations.

How a Hydraulic Oscillator Works

The power section of the tool consists of a 2:1 motor, with a valve plate fixed to the lower end of the motor rotor. As fluid flows through the power unit, it drives the spindle to rotate. Thanks to the screw mechanism, the end of the spindle moves back and forth in a single plane—this motion is referred to as the "moving valve plate."

Connected to the power unit are the valve and bearing systems, with the key components being the wear-resistant sleeve and a fixed valve plate (stationary valve). The moving valve plate and the stationary valve plate work in tight coordination: as the rotor spins, they alternately overlap and separate. This alternating motion causes periodic changes in the upstream pressure, while the resulting back-and-forth movement cyclically alters the cross-sectional area through which fluid flows within the tool—fluctuating between its maximum and minimum values.

The power section causes periodic pressure fluctuations upstream, which act on the spring subassembly, resulting in the spring continuously compressing its internal mechanism and generating vibrations. A simplified diagram of the spring subassembly is shown below:

Through the periodic pressure changes of the fluid within the short section, a force is exerted on the internal spring. As the pressure alternates—sometimes high, sometimes low—the piston inside the short section moves back and forth along the axial direction, driven simultaneously by both the pressure and the spring's restoring force. This reciprocating motion in the axial direction then induces similar back-and-forth movement in the other downhole drilling tools connected to the bit. Since compressing the spring consumes energy, when this stored energy is released, 75% of the resulting force acts downward—directly toward the drill bit—while the remaining 25% pushes upward, opposing the bit’s direction.

The hydraulic oscillator causes the drill string to move up and down, generating a longitudinal reciprocating motion within the wellbore. This converts the temporary static friction at the bottom of the well into dynamic friction, significantly reducing frictional resistance and ensuring efficient drilling pressure.

Chengdu Tdrill Energy Technology Co., Ltd.

Related News


A New Journey, Achieving Success Today|The annual gala of Chengdu Tdrill Energy Technology Co.,Ltd. concludes successfully, setting sail on a new chapter with renewed vigor.

The annual meeting of Chengdu Tdrill Energy Technology Co.,Ltd., themed "Leap into a New Journey, Achieve Success Today," has concluded successfully. All colleagues and guests gathered together to review past achievements, outline plans for the new year, recognize outstanding individuals, unite our strengths, and jointly embark on a new journey of high-quality development for the company.


2026 Spring Festival Holiday Notice

Our company is pleased to announce the 2026 Spring Festival holiday schedule: The holiday period will run from February 11, 2026 (the 22nd day of the 12th lunar month) to February 23, 2026 (the 7th day of the 1st lunar month). Normal office operations will resume on February 24, 2026 (the 8th day of the 1st lunar month). During the holiday period, routine business processing will be temporarily suspended. We will promptly respond to any inquiries or collaboration requests once we resume work. On this joyous occasion of the Spring Festival, our company extends festive greetings to all our valued customers. We deeply appreciate your long-term support and trust, and wish you a happy Spring Festival and smooth sailing in all your endeavors.


PDC Drill Bits Crossing Intersecting Formations: How to Avoid Damage Caused by “Instantaneous Overload”

In oil drilling operations, the transition zone where the drill bit moves from soft rock formations into hard rock formations (or vice versa) is often a high-risk area for drill bit damage. A recent study, using sophisticated digital simulations, has revealed the underlying mechanical mechanisms behind this phenomenon and proposed effective solutions.

Product Inquiry

Please fill in the question you’d like to consult about, and we’ll provide you with the appropriate product support based on your needs!